BLOWHARD PPV Fans - Firefighting-Fans, Firefighter-Fans, Firefighting-Ventilators, Firefighter-Ventilators, Firefighting-Blowers, Firefighter-Blowers


20″ QUICKEE – Firefighting fan – When optimum air performance and flexible use at low weight are required.

Based on the proven technology of BLOWHARD’s successful BH-20 model, but with higher ventilation performance in an even smaller and even lighter package, our compact and lightweight QUICKEE firefighter fan is the most efficient and effective firefighter fan on the market, replacing purely electric fans thanks to its excellent performance values.

#firefighting fans #firefighting-fans #firefightingfans #high performance fans #high performance ventilators #overpressure fans #overpressure ventilators #firefighter fans #firefighter ventilators #battery fans #battery ventilators #accumulator fans #accumulator ventilators

BLOWHARD Fulfills DIN 14963

BlowHard firefighting ventilators have been tested and comply with the new DIN 14963 standard for portable ventilation equipment.

Quickee – DIN14963-EM-A-1-1
Commando –DIN14963-EM-A-2-1


Battery life is important for PPV Firefighting-Fans because every firefighter should decide for himself when he no longer needs the high-pressure fan. BLOWHARD relies on integrated high-power batteries because they enable a loss-free energy transfer, a longer running time of the fans, and a longer life than is possible with replaceable batteries. In addition to battery temperature management, the integrated battery technology also enables the IP 67 standard. The devices are therefore dust & waterproof and are therefore also ideally suited for tough firefighting operations.

The fundamental goals for every BLOWHARD Firefighting Fan are the highest and industry-leading performance values. Here, not only the battery, motor, and electronics used are decisive, but also in particular the aerodynamic design of the fan unit, such as the rotor blades and their number, as well as the design of the air grille and much more. The decisive factor is how efficiently the fan is able to handle the power provided by the battery.

Performance without control is useless. This also applies to firefighting fans. Even the highest air volumes and the highest air pressure are of no use if they cannot be targeted and used efficiently at the point of use. The BLOWHARD High-Flow-Jet airflow management system takes advantage of the already high-performance values of BLOWHARD fans and directs them precisely to the desired location. It simply offers you more options and reserves. It makes BLOWHARD an unbeatable helper in fire and smoke management.

Not every location is the same. The BLOWHARD fan design allows you to continuously tilt the airflow up to 180 degrees and precisely adjust the airflow to the conditions at the deployment site. This stepless adjustment capability allows for a wide range of tactical settings and arrangements at the job site. BLOWHARD provides you with simple but highly effective and safe PPV ventilation, no matter what the nature of your deployment site looks like.

On the emergency site, every second counts. BLOWHARD units are designed to be deployed very quickly and with maximum effectiveness at the fire scene. Both, the lightweight and the small volume of the PPV ventilators are of crucial importance for rescuers. The units are light enough to be carried to the scene by a single person and take up little storage space on fire trucks.

BLOWHARD firefighting fans are designed and manufactured for use in the toughest fire scene conditions. Water, sand, impact, and heat make little difference to the BLOWHARD fans. No wonder, because they were developed together with firefighting professionals. Despite their lightness, no compromises are made on solid construction. The firefighter fans are suitable and tested for many years of use under the toughest firefighting conditions.

At the scene of a fire, every second counts. This applies both to the fire scene and to the rescuers as well as the possible victims. BLOWHARD high-pressure ventilators, which are indispensable in such rescues, are therefore ready for use extremely quickly. The firefighters’ concentration should be on the operation and tactics at the fire scene, not on the cumbersome set-up and operation of the firefighting ventilators. BLOWHARD fans are built in such a way that anyone can quickly set them up at the scene, even without explanation

As easy as that – Simply set down the BLOWHARD fan, align it and start the high-pressure fan, focusing full attention on the source of the fire. The operation of the equipment must not be a mystery. Electronic “gimmicks” are of little use, as concentration should be on the mission and mission-tactics, not on the operation of the equipment. Even without technical training, BLOWHARD fans are very easy to operate.

BLOWHARD PPV positive pressure ventilators are designed for low operating costs. On the one hand, the units offer very high mechanical quality combined with a very long service life. The fire department ventilators always provide you with appropriate reserves, which reduces the overall load on the ventilators. The availability of spare parts and corresponding warranty plans further reduce your operating costs. Components of the highest quality are installed which have been developed in-house and manufactured for this purpose. Only the most modern, reliable, tested, and certified battery technology is used. So that the rescuers do not face any surprises.


For more distant locations, you can rely on the wheelset of the large Commando fan. It makes it possible to transport the firefighting fan comfortably to the place of operation and does not take up any additional space on the fire truck. Valuable power resources on your part are available for hard work and not for transporting the pressure fans. Order your fan with these special accessories from BLOWHARD

With an appropriate suction and pressure hose, additional rescue options are created in smoke ventilation or pressure ventilation. The possibilities in tactical ventilation and especially in smoke extraction from trapped rooms increase. These suction and pressure hoses are now also available in a heat-resistant version. Order your fan with these special accessories from BLOWHARD

Protecting structures and emergency personnel and cooling is the task of water mist attachments. The BLOWHARD HIGH-FLOW-MISTER is specially designed for use on BLOWHARD equipment, can be mounted extremely quickly by means of a pot magnet, and does not obstruct the airflow. It enables the cooling of fumes, building structures, and also of emergency personnel. Order your fan with these special accessories from BLOWHARD

Secure the fire scene and the ventilation site in an optimal way. The easy-to-use high-power LED warning flashers from CARE-FLARE offer additional protection and provide increased safety for emergency personnel as well as victims due to their intensive warning function at a distance. CARE-FLARE is available in red/white, blue/white, and yellow/white and with different flashing functions. Order your fan with these Important Accessories from CARE-FLARE


20″ QUICKEE – Firefighting fan – When optimum air performance and flexible use at low weight are required.

Based on the proven technology of BLOWHARD’s successful BH-20 model, but with higher ventilation performance in an even smaller and even lighter package, our compact and lightweight QUICKEE firefighter fan is the most efficient and effective firefighter fan on the market, replacing purely electric fans thanks to its excellent performance values.

The easy transport and low weight allow the unit to be quickly put into position and it conserves the strength of your rescue team. Due to its compact dimensions, it takes up little space on the vehicle, which allows you to carry other important items or, for example, several fans (In the same area as a gasoline fan) for a strategic or larger operation.

The QUICKEE can be tilted at any angle between 0 degrees and 180 degrees and can be fully charged within three hours, with the battery capacity level always clearly and visibly displayed on the device

BLOWHARD PPV Fans - Firefighting-Fans, Firefighter-Fans, Firefighting-Ventilators, Firefighter-Ventilators, Firefighting-Blowers, Firefighter-Blowers


  • Rotor: 508mm – 20″
  • Dimensions: 534mm x 534mm x 248mm – 21 “x21 “x9 ¾”
  • Weight: 21kg – 46 lbs
  • Direct airflow: 19,369 m3/h – 11,400 CFM AMCA equivalent.
  • Generated airflow: 40,820 m3/hr – 24,000 CFM
  • Battery: Li-Ion
  • Run time: 40+ minutes at 19,369 m3/h – 11,400 CFM
  • Run time: 4+ hours at 11,045 m3/h – 6,500 CFM
  • Charge time: 0% – 90% in 1 hour 45 minutes.
  • Charge time: Full charge time 3 hours.
  • Life: Up to 500 full charge cycles, industry standard.
  • Dual power supply: Battery or AC power operation.
  • Seamless automatic switching between power sources
  • Protection against dust and water: IP-67
  • Noise level: 87 dB at 3 m – 10 feet
  • Fan tilt: 0 – 180 degrees – Stepless
  • Battery capacity indicator
  • LED ambient light with adjustable angle
  • 2 years warranty

NEW – BLOWHARD ELEKTRO – Blowhard is the pioneer resp. the inventor of battery firefighting fans. Hardly anyone has more experience in this field of pressure ventilation. Nevertheless, the successful BLOWHARD BATTERY models are now also available as a PURE ELECTRIC version BLOWHARD ELEKTRO. The big advantage is the lower weight. All other performance values remain the same. Those who wish can easily upgrade their device with a rechargeable battery at a later date.


The battery: Watch out when buying a PPV firefighting fan!
Battery-powered firefighting fans of all kinds are on the rise worldwide. Products have long since gone far beyond DIY applications, and rechargeable batteries are increasingly finding their way into the professional sector. The development does not stop at firefighting fans or rescue tools. Today, a modern rechargeable battery can easily meet the correspondingly high requirements, provided that a few points are taken into account when purchasing and caring for it.

Charging & power electronics – Does your PPV firefighting fan have brains or just brawn?
What your high-performance firefighting fan brings with it in terms of design inefficiencies must be made up for in terms of sheer extra power. As with a gasoline engine running above its power limits, this is reflected negatively in the service life and in high service costs for the entire system. Wouldn’t it be significantly better, especially with battery-powered firefighting fans, to make smart use of the available resources, nota bene, without having to have someone standing next to it all the time to constantly regulate the overpressure fan?

Larger fans on lower power levels instead of small overpressure fans on full load
Of course, you want to use the smallest firefighting fan in the field. It takes up little space on the vehicle and is easy to bring to the fire scene. However, there is a lot to be said for the larger PPV firefighting ventilator, which also has more reserves and is more forgiving of less-than-optimal deployment tactics.

  • A larger fan instead of a small PPV firefighting fan! A larger firefighting fan can thus help to cover the increased power requirements in the field. Equipped with a large integrated battery, it can provide power comparable to that of gasoline-powered fans.

  • Large firefighting fans expand the range of applications! Large firefighting fans greatly expand versatility and usability in the field, enabling scenarios that were previously not possible with battery-powered positive-pressure fans. For example, the effective ventilation of large building structures and the successful pressurization of high-rise staircases to keep them smoke-free.


Hardly anything is worse than a fire. This is not only true in private life but also for companies. Even a small fire can massively disrupt or even prevent production processes and thus bring entire supply chains to a standstill. And this not only shortly, but also long after the actual fire.

It is not always guaranteed that production can be resumed quickly after the fire has been extinguished. Contaminations or deposits of smoke gases paralyze machines even if they were not directly affected.

It is therefore essential to protect unaffected areas of a production facility and to control fumes and the fire itself so that it does not affect adjacent areas. With a cleverly used PPV overpressure ventilator, as it is used more and more often by the fire department, such fires cannot be extinguished directly, but at least the smoke gases can be controlled in their spread. With the training of your staff, long downtimes in your production can be reliably avoided in case of an incident.

The costs for an appropriate equipment with PPV overpressure ventilators are small in comparison to the costs, which result from long downtimes. In our opinion, an appropriate battery-powered pressure ventilator belongs in every modern production plant. Best with training of the personnel and the company fire department and directly next to the fire extinguisher…


  • Charging electronics – The built-in charging electronics allow short charging times on the vehicle and optimal care of the battery. This happens automatically when the BLOWHARD fan is connected to a mains socket and completely without additional and space-consuming external chargers.

  • Power Electronics – Integrated power electronics allow for maximum battery life through optimal temperature control, protecting batteries and extending their life.

  • Dual-Power – Blowhard fans can seamlessly switch between battery and mains power without interruption, requiring no replacement batteries and minimal attention during use.

  • Large Battery – Blowhard uses the largest possible batteries to avoid high peak loads and therefore temperature spikes during power output. This extends the life of the integrated batteries.

  • Fan design – The rotor and ventilation grille have been specifically designed for the task at hand. They guarantee maximum build-up of air volume and air pressure with minimum energy consumption.

  • High-Flow Jet – Blowhard airflow management combines the advantages of jet airflow with those of cone airflow. As a result, the units offer the user a range of applications with appropriate reserves.

  • Lightweight construction – The Blowhard device design was developed together with firefighters in the field and features extremely high load capacity combined with low weight and device volume.

  • Quick connectors – Blowhard is easy and quick to use. Powerful pot magnets allow quick attachment of accessories such as water rings or hoses.

  • Ergo-Fold – The airflow of a Blowhard unit can be smoothly and easily adjusted up to 180 degrees to provide a wide working area. This is accomplished in a simple, intuitive manner, even in inaccessible job sites.

  • Wheelset – Wheels and handles should not hinder the operation and should not take up space on the emergency vehicle. The wheelset for the BLOWHARD Commando can be folded away including the handle, thus saving important space for additional equipment.


PROTECT your patients after recovery – RIGLOO RESCUER – Rescue shelters, medical shelters & ambulance shelters for pre-hospital use

MANAGE your operation, not your pump. – KUBE-POMPA – The pump for the rough jobs. Works in almost any application situation

BCC ensures communication in emergency situations. It connects the networks that still exist and extends the limits through interoperability

SECURE your site additionally with – CARE-FLARE – Emergency Warning and Safety- High-Power LED Flashlights and Warningbeacons